Top and Bottom Guiding
A well accepted industry standard particularly suited for double seated plugs to provide adequate support against side loads.
A well accepted industry standard particularly suited for double seated plugs to provide adequate support against side loads.
Flow capacity is at top levels for contemporary double seated regulators and is attained with very little pressure recovery as indicated by a high critical flow factor.
0.4 Factor Trim - the most practical double seated trim design giving a substantial reduction in capacity while maintaining desirable flow characteristics.
Materials of construction have been selected for high performance and long life when handling the high pressure drop capabilities of the valve.
For high temperatures, mount the regulator with the actuator below the body to protect the diaphragm. This allows a condensate barrier to form. If not, a separate barrier is required—consult the factory.
Models 525 and 526 Regulators are designed for use with the 10900 Series Actuators for reducing, back pressure and differential pressure applications.
FunctionPressure Reducing 525 Differential Pressure Reducing 525-50 Back Pressure 526 Differential Back Pressure 526-50 |
ServiceSteam, Gas, Liquids |
Size¾” through 4” (20 through 100 mm) |
Ratings & ConnectionsFlanged : ASME CL150-600 Welded : BW or SW Screwed : NPT ¾” through 2” (20-50 mm) |
BodyType : High Capacity Globe with Double Seated Top and Bottom Guided Plug Materials : Carbon steel, stainless steel |
TrimPlug Type : Disc Seat Ring : Threaded Guide : Heavy Top and Bottom Guided Capacity : Full Area, Reduced Capacity in All Sizes |
ActuatorType : 10900 Spring Diaphragm |
Masoneilan has made various downloads available for the Masoneilan 525-526 Series, including the specification sheet and the information sheet. These can be downloaded via the Masoneilan website.
As a Masoneilan specialist, Paul will answer all your questions.